Front Wheel Drive Bearing Removal & Installer
Model :
AUT-00328
AUT-00328
Front Wheel Drive Bearing Removal & Installer
●Steering Wheel Puller
Enforcing type: It's specially designed for pulling up
the steering wheel.
Ball bearing inserted (Steel ball).
Handle with ease! 2~3 Steering Wheel Puller
applied at the same time is fine.
It's available for the light saloon car~middle sized truck.
●It's not available for those steering wheels
equipped with the air bag.
●Please purchase the suitable screws, or pads in the market
(Hardness: above 21 degree.) if the components in the
package don't fit with your car.
(Specification: M8xP 1.25 100L, M10xP 1.25 100L)
●Applying Impact Wrench, or Hammer is prohibited.
●Please rinse the cover and the spiral line of the
central screw with the grease.
●Usage:
1. Unscrew the dual-nuts (anti-loosing nuts) on the
steering wheel after the horn button is taken off.
2. Combine the qunching awl (the tool for pulling) and
the hanging set with the suitable screw and pad.
(Fasten the screw with averaged force while screwing.)
3. Take off the steering wheel after the central screw
is fastened.
●Name & Code no. of the Components:
01 Hanging set M16 x P2
02 Central screw
03 Cover of the central screw
04 Steel ball (2.5 x 12pcs)
05 Installation helical rod M4
06 Pulling screw M8 (3 pcs)
07 Pad M8
08 Pulling screw M10
09 Pad M10 (3 pcs)
Front Wheel Drive Bearing Removal & Installer
●Steering Wheel Puller
Enforcing type: It's specially designed for pulling up
the steering wheel.
Ball bearing inserted (Steel ball).
Handle with ease! 2~3 Steering Wheel Puller
applied at the same time is fine.
It's available for the light saloon car~middle sized truck.
●It's not available for those steering wheels
equipped with the air bag.
●Please purchase the suitable screws, or pads in the market
(Hardness: above 21 degree.) if the components in the
package don't fit with your car.
(Specification: M8xP 1.25 100L, M10xP 1.25 100L)
●Applying Impact Wrench, or Hammer is prohibited.
●Please rinse the cover and the spiral line of the
central screw with the grease.
●Usage:
1. Unscrew the dual-nuts (anti-loosing nuts) on the
steering wheel after the horn button is taken off.
2. Combine the qunching awl (the tool for pulling) and
the hanging set with the suitable screw and pad.
(Fasten the screw with averaged force while screwing.)
3. Take off the steering wheel after the central screw
is fastened.
●Name & Code no. of the Components:
01 Hanging set M16 x P2
02 Central screw
03 Cover of the central screw
04 Steel ball (2.5 x 12pcs)
05 Installation helical rod M4
06 Pulling screw M8 (3 pcs)
07 Pad M8
08 Pulling screw M10
09 Pad M10 (3 pcs)
