Advanced Search

  • Engine Intake System Carbon Washing Kit

Engine Intake System Carbon Washing Kit

Model : AET-2106

AET-2106
Engine Intake System Carbon Washing Kit

Instructions:
1.Warm up the engine;then shut off and disassemble the spark plugs from engine.
2.Insert the cleaning reagent into the canister and ensure without and leakage; fasten the knob of regulation and set the slide valve to "on" position.
3. Ensure the pressure gauge of regulator indicate 0 psi; and lock on the vacuum knob(#07) then turn on the knob of
4.Regulator allow the compression air into the canister.
5.Insert the lead hose to the spark plug holes and raise the pressure gentlely. The cleaning reagent will fl ow in
6.The combustion chamber. While all combustion chamber fi lled by the cleaning reagent; remove the lead hose.
7.The pressure gauge of regulator indicate arround 20 psi.
8.Set the slide valve to "off " position and stay 15-20 minutes.
9.The carbon in the combustion chamber will react with the cleaning reagent.
10.Release the vacuum knob 2 turns; and reinsert the lead hose into the spark plug hole; then set the slide valve to "on" position.
11.Raise the air pressure to 90 psi. The carbon an cleaning reagent will suct out. The cleaning procedure completed.
12.Reinstall the spark plugs on the engine; and start the engine.
- This is the best procedure for clean the carbon in the combustion Operational example chamber.
- Packing 10/11/12/2.5'

Related Products

Cam Holding Tool For Mercendes-BENZ Engines

Cam Holding Tool For Mercendes-BENZ Engines

Fuel Filter Installation Tool

Fuel Filter Installation Tool

Diesel Fuel Filter Socket (HDi Engines)

Diesel Fuel Filter Socket (HDi Engines)

No-Spill Coolant Funnel Kit

No-Spill Coolant Funnel Kit

Diesel Injection Pump Wrench

Diesel Injection Pump Wrench

Battery Terminal Clamp Spreader

Battery Terminal Clamp Spreader